#ABCDEFGHIJKLMNOPQRSTUVWXYZ

3-Tub Sensory Table

3-Tub Sensory Table
Three separate tubs for wet and dry play. Laminate top for E-Z cleanup. 20½" wide x 59" long x 24" high.  Baltic Birch frames fit easily through classroom doors.  Maple legs are fitted with non-marking swivel casters.   KYDZTuff finish resists stains, will not yellow and is easy to clean.  Lifetime Warranty.

Please contact your Sharp School Services representative for competitive pricing.


Price:$551.30
Manufacturer ID:0885JC

Sensory Table

Sensory Table
Six-inch deep plastic tub.  22" wide x 42" long x 24" high.  Baltic Birch frame fits easily through classroom doors.  Maple legs are fitted with non-marking swivel casters.  Drain with valve included .  Birch activity cover included.  KYDZTuff finish resists stains, won't yellow and is easy to clean.  Lifetime Warranty.

Please contact your Sharp School Services representative for competitive pricing.


Price:$579.80
Manufacturer ID:0285JC

Light Table

Light Table
Multi-functional activity table saves valuable classroom space.  Use as a tracing table, or with Prism blocks or Legos (not included).  Reflective panels help distribute light evenly.  UL approved electrical components.  42.5" long x 22.5" wide x 18.5" high.  KYDZSafe edges are fully rounded and recessed backs enhance the strength and appearance.  KYDZStrong construction employs the dowel pin technique.  This leaves the thickness of the material intact where most of the stress occurs.  KYDZTuff finish resists stains, won't yellow and is easy to clean.

Please contact your Sharp School Services representative for competitive pricing.



Price:$783.20
Manufacturer ID:5853JC

Multi-Purpose Square Table

Multi-Purpose Square Table
Maple table legs and tabletop. Scratch-resistant lamniate, easy to clean tabletops.  KYDZSafe edges are fully rounded.  Adjustable height legs 14" - 24."  Lifetime Warranty.

24" wide x 24" long x 14" - 24" high.
*When ordering chairs and tables, please allow six to ten inches from the seat to the top of the table.

Please contact your Sharp School Services representative for competitive pricing.


Price:$340.60
Manufacturer ID:6253JCP251

Multi-Purpose Round Table

Multi-Purpose Round Table
Maple table legs and tabletop.  Scratch-resistant laminate, easy to clean tabletops.  KYDZSafe edges are fully rounded.  Adjustable hight legs 14" - 24."  Lifetime Warranty.

30" diameter x 14" - 24" high
*When ordering chairs and tables, please allow six to ten inches from the seat to the top of the table.

Please contact your Sharp School Services representative for competitive pricing.


Price:$379.80
Manufacturer ID:6260JCP251

Phenolic Resin Science Lab Table

Phenolic Resin Science Lab Table
National Public Seating Phenolic Resin Science Lab Table

Phenolic Resin Science lab tables by National Public Seating are built with ash hardwood legs and aprons that are attractively finished and durable enough for any school science lab. Sleek ¾" top is phenolic throughout offering a superb lab surface material. These science lab tables are highly impervious to most chemicals, acids, corrosives, stains and moisture and are ideal for high school and higher level school chemistry classrooms. All are outfitted with rubber liquid-protecting leg boots and adjustable glides for accurate leveling.
Tables are also available with two book compartments built into the tables for additional storage space.
              
  • Sleek ¾" solid phenolic top with ⅛" bevel edge
  • 2-1/4" standard tough ash hardwood legs attach with metal on metal double bolt through assembly
  • 13-gauge corner braces
  • Rubber black boots to cap and protect table legs from water spills
  • Adjustable glides for accurate leveling
  • Available with optional 36" H legs
  • Emission free, UV resistant
  • Meets of exceeds BIFMA/ANSI standards
  • MAS Certified Green
Size Model Number List Price
54" x 24" PSLT2454 $925.00
 60" x 24"  PSLT2460  $977.00
 60" x 30"  PSLT3060  $1088.00
 54" x 24"  PSLT2454-BB w/ book compart.  $1012.00
 60" x 24"  PSLT 2460-BB w/ book compart.  $1064.00
 60" x 30"  PSLT 3060-BB w/ book compart.  $1175.00

Please contact your Sharp School Services representative for current pricing.



Price:$925.00 - $117500
Manufacturer ID:NPS PSLT Series

Two Station Science Cabinet Table w/Drawers

Two Station Science Cabinet Table w/Drawers
Diversified's Two Station Science Cabinet Table w/ Book Compartments and Drawers (C2201K)

Diversified’s Two-Student Science Table is a great choice for any science or lab room.  This table features a sturdy all-wood cabinet which supports a plastic laminate top. This model has book compartments in the apron,  two locking drawers and a lockable door on the base.  Made to endure heavy use.  Size: 66" w x 24" d x 30" h.

C2201K Features

  • Features a center cabinet with adjustable shelf and locking door
  • Two locking drawers
  • Top is 1- 1/4"  plastic laminate
  • Oak, hardwood and oak veneers
  • Clear UV finish resists most chemicals.
  • 13-gauge steel corner braces
  • Rubber base molding and leg boots finish the unit
  • Limited lifetime warranty
  • Assembly required

Please contact your Sharp School Services representative for competitive pricing.




Price:$2164.00
Manufacturer ID:DW C2201K

Two Station Science Service Center w/ Drawers and Drs

Two Station Science Service Center w/ Drawers and Drs
Diversified Two Station Science Services Center w/ Drawers and Doors
with Phenolic Resin Top

Two student single faced workstation that provides a fully equipped science center. Lab partners can work together while facing the instructor when seated at these two student science lab workstations. The overhanging work surface provides plenty of room for equipment and materials with an excellent space for lab stools underneath.  Size: 66" w x 30" d x 36" h.  Sink measures: 12" wide x 8" long x 6" deep.

C2514K Features:
  • 3/4" Phenolic resin work surface and sink won't get damaged by chemicals or extreme heat
  • Made of solid hardwood, solid red oak, and oak veneer for maximum durability
  • UV finish
  • GFI-protected, 20-Amp AC duplex receptacles prevent damage and injury
  • Includes 1 sink and 2 multiservice fixtures
  • Locking drawers and cabinets keep chemicals and lab equipment secure yet within reach
  • Two book compartments
  • Open bottoms provide ample room for individual lab stools
  • Adjustable leveling glides
  • Rubber leg boots protect against chemicals
  • 25-year warranty
Please contact your Sharp School Services representative for competitive pricing.





Price:$5115.00
Manufacturer ID:DW C2514K

Laminate Top Hardwood Science Table w/ Book Compartments

Laminate Top Hardwood Science Table w/ Book Compartments
Laminate Top Science Table with Book Compartments
(Chemical Resistant Laminate Top)

Diversified Spaces science tables represent the very best in American made, quality science tables. Legs and aprons are constructed from smoothly machined hardwood ( red oak) with a clear chemical resistant finish. A 1-1/4" thick plastic laminate top is a sturdy foundation for science and STEM learning. Table aprons are constructed of solid red oak and are 4-1/2"H x 13/16"D with heavy-duty 13 gauge steel corner braces that span the full height of the apron.  2-1/4" square solid hardwood legs are attached to apron with heavy duty mounting hardware. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots to protect against chemical spills. Book compartment aprons are constructed of solid hardwood and measure 14"W x 13-5/8"D x 3"H.
Other table sizes available - pricing varies.
  Item #C7141K30N    30" d x 60" w     List Price: $948.00 each
  Item #C7601K30N    24" d x 60" w     List Price: $811.00 each


Please contact your Sharp School Seervices representative for competitive pricing.



Price:$811 - $948
Manufacturer ID:DW C7141K30N C7601K30N

Epoxy Resin Top Hardwood Science Table

Epoxy Resin Top Hardwood Science Table
Epoxy Resin Top Science Table (30" x 60")

Diversified Spaces solid hardwood science tables represent the very best in American made, quality science tables. 1" thick solid epoxy resin table tops represent the very best in science tabletops. Epoxy resin science tables are ideal for all school levels through college, and industry labs due to its resistance to caustic chemicals and heat. Impervious to moisture, this table features beveled edges and a drip-groove routed along the under side of the top. Truly a heavy duty table, weighing on average 40lbs heavier than standard tabletops.
Legs and aprons are constructed from smoothly machined solid red oak with a clear chemical resistant finish. Table aprons are 4-1/2"H x 13/16"D hardwood with heavy-duty 13 gauge steel corner braces that span the full height of the apron. 2-1/4" square solid hardwood legs are attached to apron with heavy duty mounting hardware.
Size: 30" d x 60" w x 30" h.  Other table sizes are available - pricing varies.
                        
List Price: $1508.00


Please contact your Sharp School Services representative for competiive pricing.



Price:$1508.00
Manufacturer ID:DW P7146K30N

Lobo Table, 30" x 60" with Chem.-Resitant Top

Lobo Table, 30
Wisconsin Bench Adjustable Height Lobo Table, 30" x 60"
Chemical-Resistant HPL Top

All-purpose, havy-duty work table perfect for art rooms or science classrooms.  This durable, adjustable-height table has a high-pressure laminate top that is chemical-resistant, heat-resistant, and waterproof. The bonded edge is designed to prevent little fingers from peeling it off the table, and the tight seam won't trap food or dirt particles. The top is easy to clean, and the powder-coated finish hides scratches and deters graffiti, making it an ideal choice for school classrooms!

The frame is made of 16-gauge steel, giving it long-lasting strength. Using two screws on each leg, the table legs can be adjusted easily in one inch increments to bring the height from 22.5" to 36.25", allowing students and other users to sit or stand while working on projects. Each 2" diameter leg is built for heavy use out of 14-gauge steel tubing, and the outer edge of the tabletop is bonded to the core material so that it will never separate from the rest of the table, no matter how long it’s in use.

Some assembly required-- Simply bolt the legs to the 10-gauge reception plate on the frame for a stable, wobble-free work experience. Don't worry about uneven floors either, as non-marrying glides area adjustable to compensate for any bumps or sloping.

This product has been Greenguard certified to support better indoor air quality for schools, libraries, churches and public spaces.      
                        List Price: $980.00


Please contact your Sharp School Services representative for competitive pricing.
 





Price:$980.00
Manufacturer ID:WSB 708895

Work Table, 54" x 64",with Storage

Work Table, 54
Custom Work Table, 54" x 64", Two-Piece Maple Block Top
Includes Storage w/ Doors underneath

WB Manufacturing understands that no two schools are alike. In fact, even classrooms within schools have their own needs. Therefore, they work closely with our customers to make sure we address every need.  The Wisconsin Bench extensive line of work tables offer many options for a collaborative learning environment. Customers can choose from a variety of looks and feels that all fit into a modern, versatile learning environment.  Custom sizes and products are no problem with the WB design team.
The Custom Work Table is mounted on a sturdy base with six sturdy casters and is overall 36" high.
The interior shelf measures 44" x 48."
Two-piece maple block top.
Includes a machine-applied, precision plastic edge 3mm thick. Select from square or radius corners. Standard 1.5” radius corners.  Custom radius corner available with minimum of no less than 1."
                               List Price: $ 2699.00


Please contact your Sharp School Services representative for competitive pricing.



Price:$2699.00
Manufacturer ID:WSB MWS5464MB

Rectangle Adjustable Height Table, 30" x 72"

Rectangle Adjustable Height Table, 30
Rectangle Adjustable Height Table, 30" x 72"

Fleetwood Group's Makerspace Tables include fully welded steel frames built to withstand everyday classroom use.  The tables have all steel legs and are height adjustable from 29" to 42."  Phenolic resin tops are ideal for science classrooms and provide a unique appearance and a high resistance to chemicals.
Includes locking casters.
                              List Price: $1566.00


Please contact your Sharp School Services representative for competitive pricing.



Price:$1566.00
Manufacturer ID:FW TUNR7230BLK

Laminate Science Lab Table

Laminate Science Lab Table
Laminate Science Lab Table

National Public Seating strong and sturdy science tables are a necessity for your science lab. Built from solid ash wood with an attractive polyurethane clear finish, these High Pressure Laminate Science Lab Tables are perfect for many science and chemistry classrooms. HPL tabletops provide an exceptional work surface that has been tested according to NEMA standard testing to resist scratches, boiling water, high temperatures, and many forms of stains including a number of acids.
NPS Science Tables offer a choice of book compartments or solid front aprons, with an industry top-of-the-line ash wood frame and legs outfitted with rubber liquid-protecting leg boots and adjustable glides for accurate floor leveling. 13-gauge corner braces.   Height: 30" (Also available in 36" High).

  Item # SLT2-3060H   Size: 30" x 60"     List Price: $1247.00 each
  Item # SLT2-3072H    Size: 30" x 72"     List Price: $1292.00 each


Please contact your Sharp School Services representative for competitive pricing.



Price:$1247.00 - $1292.00
Manufacturer ID:NPS SLT2-3060H SLT2-3072H